If you don't get an e-mail with your access data, please make sure that you have already registered with us. As soon as you are registered, you can login with your e-mail address and your password.
In case you still have problems logging in, please turn to us by e-mail: email@example.com
TheMeteoJet receiver is a new development by BONITO and uses the latest receiving technology. It is a first class computer-based radio. The signal is directly processed with the BONITO software (MeteoCom 6, ProMeteo2). From 40 kHz to 30 MHz, the receiver can be tuned with an accuracy of 1 Hz. The extremely good sensitivity was optimized even more so that good reception is guaranteed with even relatively short antennas. Because of its high overload capacity, the BONITO MeteoJet receiver is an ideal basis for reliable and automatic reception.
The receiver comes in a small housing and is connected to a PC (not supplied) via USB and is directly supplied with voltage. A BNC connector is on the rear of the housing. Because the BONITO MeteoJet is a so-called IF receiver, the decoding of maritime signals is no problem whatsoever. The digitalized signal is processed from the very beginning. Thus data can be decoded easily and new modes can be added with an update. By decoding weather faxes, Navtex and RTTY directly, a much better quality is the result. Additionally, the digital signal filtering has the advantage that even distorted or weak signals can still be decoded very well.
On board, you need almost no room to install the MeteoJet. There is only one USB cable required, which also supplies the radio with voltage. An additional power supply is not necessary
The BONITO MeteoJet works with third party software as well. As far as the quality of the reception is concerned, it surpasses that of the WINRADIO and that for a spectacular price.
The difference between the MeteoJet and the RadioJet 1102S is that MeteoJet is more adapted for maritime use and that is why the frame is sealed with four layers of special lacquer to withstand the salty air at sea.
Frequenzbereich: 40 kHz - 30 MHz
Modulationsarten AM, LSB, USB, CW, DRM,
Dynamikbereich ~96.32 dB /~134,5 MDS
Trennschärfe regelbar zwischen 100 und 15000 Hz
Antennenanschluss 50 Ohm BNC
PC-Anschluss und Treiber Installation USB 2.0 selbst installierend mit HID- und Audio-Interface
Arbeitsstrom max. 220mA vom Computer gespeist < per USB-Port >
Größe / Gewicht 112 x 103 x 31mm / 0.22kg